K-80 Trap Special

K-80 Trap Special. Consistent Performance Clay After Clay.

Krieghoff is proud to offer the K-80 Trap Special Combo with fully adjustable high-post rib on the over & under, unsingle and top single barrel for point-of-impact (POI) adjustments. Built around the proven K-80 receiver, the Trap Special comes with 30″ or 32” O/U-barrels and 34” Unsingle or Top Single barrel. The Trap Special can also be ordered as a complete gun with the barrel of the shooter’s choice. Titanium Choke tubes and a Monte Carlo trap stock with adjustable comb specifically designed for the high-post rib are standard features. Shipped from the factory with a 70%/30% POI in all barrels, the rib can be adjusted so the gun shoots a fairly flat 60%/40% or up to almost a full pattern high. Changing your POI to your personal preferences is as simple as using the adjustment wheel on the rib of the Trap Special. By loosening the set screw and lowering the rib down you can achieve a higher POI. The higher rib provides for good visibility around the gun and quick target acquisition. An added benefit is the low recoil due to a “heads-up” shooting position. Particularly unique is the fully adjustable O/U-barrel for shooting doubles. Not only can the point-of-impact of both barrels be adjusted simultaneously, you may also adjust the spread between the 2 free-floating barrels by changing the front hanger which results in different POI for each barrel, if desired. This way the bottom barrel can be set to shoot higher than the top barrel. The K-80 Trap Special Combo with the complete point-of-impact adjustment is a hallmark of Krieghoff shotguns.

Gauges:
12 Gauge; 3” chambers

Barrel Lengths:
30” or 32” O/U and 34" Unsingle or Top Single: 12mm Adjustable Rib
Stock:
Right-handed or Left handed “Trap Special” stock with adjustable comb, palm swell and “Trap” forearm.

Features

  • 12ga: 3" Chamber
  • 30"or 32” O/U and 34" Top Single or Unsingle: also available In Higher Pro-Ribs
  • Extended factory screw-in chokes, incl. eight titanium choke tubes and choke wrench
  • White pearl front bead and metal center bead
  • Hardened, nickel plated steel receiver with satin grey finish
  • Single selective mechanical trigger, adjustable for finger length. Trigger pull: Approximately 3-3/4 lbs.
  • Top tang push button safety. Can be locked in “off“ position
  • Fine-checkered select Turkish walnut with satin epoxy finish
  • Standard trap special stock
  • Trap style forend
  • Stock Finish: SEF (Satin Epoxy Finish)
  • Krieghoff Negrini two barrel case

Factory Performance Options

Additional Factory options include Factory Titanium Chokes, Sub-Gauge barrels in 20 Gauge, 28 Gauge and .410. Adjust your gun's balance with optional Barrel Weights and the Krieghoff Balance System. Reduce felt recoil by having the factory provide Barrel Porting and customized your stock fit with an Krieghoff Adjustable Butt Plate system.


Factory Appearance Options

Customize the look of your K-80 with several factory appearance upgrades. From simply upgrading the wood to changing out the factory Top-Latch the options are endless. Titanium Options; swap for a Titanium Trigger in available in both a standard size, wide or short, adding titanium front hanger completes the look. More traditional is adding a Gold-Plated trigger and housing as well as customizing the trigger-guard and top-latch.

Specifications And Options

Titanium – Options
  • Titanium trigger, trigger group made of steel
  • Titanium front hanger
  • Five titanium screw-in chokes
Titanium – Options, Black
  • Titanium trigger, trigger group made of steel, matte black
  • Titanium front hanger, matte black
  • Five titanium screw-in chokes, matte black
Titanium – Options, Gold Plated
  • Titanium trigger, trigger group made of steel, gold plated
  • Titanium front hanger, gold plated
  • Five titanium screw-in chokes, gold plated
Matched Pairs

Upcharge of 10% with any order of a matching pair. This includes consecutive numbers and Stocks matching in color, figure and weight. Both guns are identically balanced.

Krieghoff Balance System
  • Barrel weights can be added underneath the forend with up to three additional 1.4 oz weights, providing an increase of 4.2 oz at the front end possible.
  • The buttstock can be equipped with a special 1.4 oz heavier than a standard stock bolt, and can accept up to three additional 1oz weights. Thus, making the buttstock up to 4.4 oz  heavier.
Gauge
  • 12 Gauge (3″), chambers are chrome plated
Barrel length
  • 30″ O/U  with 12mm adjustable rib
  • 32″ O/U  with 12mm adjustable rib
  • 34″ Top Single with 12mm adjustable rib
  • 34″ Unsingle with 12mm adjustable rib
Krieghoff Balance System – Barrel weight

Barrel weights can be added underneath the forend with up to three additional 1.4 oz weights, providing an increase of 4.2 oz at the front end possible.

Barrel Porting

Available from the factory for 12 Gauge barrels to reduce felt recoil and muzzle jump.

Krieghoff HIVIZ Pro

High Visibility fiber optic optional shotgun sight

Extended Factory screw-in chokes

Additional Krieghoff Titanium Extended screw-in chokes are available in 12 Gauge & 20 Gauge in constrictions ranging from Cylinder (.000″) to Super Full (.040″).  Also, available in steel are the Krieghoff Steel Extended screw-in chokes for 28 Gauge and .410 Bore.

Chokes are available in the following constrictions:

Number Marking Size Constriction
00 CYL Cylinder .000″
0 SK Skeet .005″
1 IC Improved Cylinder .010″
1+ LM Light Modified .015″
2 M Modified IM .020″
2+ LIM Light improved Modified .025″
3 IM Improved Modified .030″
4 F Full .035″
5 SF Super Full* (12 Ga Only) .040″

Fixed Choke barrels can be modified to fit aftermarket screw-in choke tubes, however they must be a “thin-wall” type of choke tube.  The original Krieghoff Titanium Extended screw-in choke tubes cannot be added to fixed choke barrels.

Receiver finish options
  • Nickel plated receiver finish.  Nickel is our most durable finish option for a receiver.  The nickel resists corrosion and provides a great finish for hard use.  Nickel is not available in conjunction with Gold Plating.
  • Blued receiver finish.  The Krieghoff Blued finish is a deep black color and provides a traditional look to a modern gun.
  • Nitrated receiver finish.  A nitrated finish is common on heavily engraved guns, especially with gold inlays and custom engravings. The nitrated finish provides a coin-grey finish and is easy to maintain.
  • Color case hardened finish.  Color case hardening is one of the original gun finishes available for fine shotguns.  With variations of blues, grays and straw colors the process makes a unique finish each time. Less durable than Nickel or Nitrated finishes we finalize the finish with a clear lacquer to provide an additional layer of protection.
Lock finish options
    • Internal lock parts nickel plated
    • Internal lock parts gold plated, triggers not included and must be specified
    • Titanium trigger (including trigger group), gold plated
    • Titanium trigger; trigger group made of steel; gold plated
    • Titanium trigger; trigger group made of steel, black
Engraving options
Woodstock category
  • Standard Grade
  • Category 001 (CAT001)
  • Category 002 (CAT002)
  • Category 003 (CAT003)
  • Category 004 (CAT004)
  • Category 005 (CAT005)
  • Exhibition Grade or Custom
    • A custom fit stock is almost entirely hand made with only minimal pre-machining. A typical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.
Exclusive wood categories as stock blanks (hand-crafted)

Due to the high cost of raw materials, wood grades higher than CAT005 often require a custom-made stock. The exclusive Exhibition stock blanks are limited. Therefore the availability cannot be guaranteed.

Left-handed stock

Left-handed stocks available.

Hand-crafted stock
  • Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
  • Buttstock with standard dimensions
  • Buttstock with special dimensions, made to customer’s specifications
  • Forearm with standard dimensions
  • Forearm with special dimensions, made to customer’s specifications, beavertail or semi-beavertail forearm
Wood Stock Finish Options
  • Satin Epoxy Spray Finish (Standard)
  • High Gloss Epoxy Spray Finish
  • Open Pore Oil Finish is a matte oil-rubbed finish with open grain
  • Tru Oil Finish is a glossy oil-rubbed finish with closed pores & grain
Monogram plate
  • Inlet into pistol grip cap
  • Steel pistol grip cap fully covering
Monograms
  • Two letters engraved
  • Two letters engraved in relief style
  • Two letters in silver
  • Two letters in gold
Krieghoff Balance System – Stock weight for K-80

The buttstock can be equipped with a special stock bolt, which is 1.4 oz heavier than a standard stock bolt, and can accept up to three additional 1 oz weights.

Adjustable butt plate

Krieghoff Adjustable Butt Plate is available.

Note: Fitting may require removing up to 3/4″ of the buttstock to maintain the same LOP.

Length of pull adjustment option

For K-80s with #6 and Trap Special buttstocks the length of pull (LOP) can be easily adjusted with the addition of optional pre-fitted 1/4″ spacers.  Other stocks can easily be adjusted for LOP with a Krieghoff Adjustable Butt Plate and pre-fitted spacers.

In observance of the recently passed California Assembly Bill #2571, Krieghoff International must cease all advertising and marketing activities directed at individuals 17 years and younger in California. This includes access to Krieghoff.com and the Krieghoff.com Online Store. To comply with California Assembly Bill No. 2571, Krieghoff International, Inc. requires confirmation that you are not a California Resident under the age of 18.

By clicking the confirm button below you confirm that you are not a California Resident under the age of 18.

We appreciate your understanding and cooperation in this matter. If you have any questions, please contact us at [email protected].